My love for the refreshing drink has finally come to an end after three rounds, and I have truly resolved to let it go. However, I feel a bit messed up. Knowing it won’t come back, I still kept shouting my love, and someone else has taken it on. Is this what they call success? Immediately, an apology was posted, and they said they would check and correct the detailed sizes of all products. Then, due to the changed detail page, the shocking thickness of 0.2mm became 0.3mm, which meant that this time, the 14 series was falsely advertised instead of the 15 series. I really feel messed up, no, I am messed up. This kind of apology only seems to escalate the anger of the fans. I really tried to let it go, but this person pulls you down to hell once they sink their teeth in. I have now become someone else's partner, but I do not want the brand I once loved to board the train to ruin.

It seems that I really need to grab you by the collar and pull you up one last time. So, shall we get started? Every story begins with a single question: Why does it feel different from what I saw in the video? I carefully checked the product introduction video again, but while the Pro Max and regular models show the entire appearance, the Pro model only shows the top and bottom cut off for some reason. In the 7-minute and 19-second video, there was never a moment when the fully attached tempered glass was shown. Although it feels different, I couldn't conclude that it was a different product based solely on this. Since I tend to trust only what I can see, I made a video in the previous 14 series review stating that the Pro model has a good sense of unity, but the regular model feels a bit different, so keep that in mind when purchasing. For the current 15 series, I believe the Pro model has a slightly lower sense of unity, but the Pro Max and regular models have a good sense of unity.

In fact, I was making review videos, and it was only thanks to a single frame at the end of the product introduction video that I realized it wasn't the same product as the pro model. For what reason was a different product attached and sold instead of the actual product? I considered a few possible scenarios: 

1. They mistakenly attached a different model.
2. The pre-order filming took place first, followed by the production of the product.

After thinking about these two possibilities and reviewing the video again, I noticed that the only part that matched the 15 Pro model was the curved side of the speaker hole shown in the micro-perforation area. However, just this alone didn't seem sufficient to conclude that they already had the product. I examined all the uploaded videos, and in the video uploaded on October 18, I saw for the first time that the product attached was the same as the one I received.

It was confirmed that the pre-order delivery started on October 20th. It seems unlikely that there was confusion with other products. The pre-order filming was conducted first, and it appears that the tempered glass production was completed afterward, leading to the start of delivery. Later, in a video comparing it to other brand cases, it was noted that the tempered glass, which had been well-attached, was suddenly changed. This tempered glass looks very similar to the clarity glass for the iPhone 14 Pro that I reviewed previously. However, for some reason, in other videos uploaded afterward, it showed a change back to the tempered glass for the iPhone 15 Pro. The scene displayed on the monitor was from a video uploaded on the MR channel just one day earlier, and the title was very similar to that of the case comparison video. The difference with the tempered glass for the iPhone 15 Pro is that it has a slightly lower sense of integration and is thicker.

There are only two possibilities. Why was glass that doesn't even fit properly attached? If it shifts even a little, it comes out of the frame. After comparing the 15 Pro cases, MR determined that the products I reviewed are identical to the Ringke Fusion and Bigso Levix Skin. When MR attached the tempered glass and checked the protection height, I compared it with the actual measurements I took. The attached tempered glass appears to be 0.5mm, and the 14 Pro tempered glass also does not fit with the 0.5mm standard. While the Clear Case shows perfect integration in specifications, when I actually attached the products they sell and compared them with the specifications of the products I checked, different results emerged. The case comparison shoot was done on November 2, and the day the products for sale were attached was November 3. So if the parts I checked are correct...

Mr. MR, the representative of Blue Korea and a YouTuber with 600,000 subscribers, attached the products he sells, used them well, and then removed them to attach incompatible products to create a comparison video. After filming, he reattached the 15% reinforced glass he sells and used it again. The conclusion he reached by using the incompatible reinforced glass was that third-party brand cases do not support the reinforced glass, while the Cheongnyang case showed the highest level of integration. This high level of integration is something Blue Korea has always emphasized when using its products as a set. This leads to my story up to the creation of the previous video’s five seconds, highlighting that the matching height provides a good touch experience and showing results measured in 0.05mm increments, as well as the result values of the Cheongnyang case, which has no margin of error.

As a result, the video that led to the overwhelming first-place outcome makes the apology, which claims things that had not been measured before, difficult to understand. The actions that induce consumers to harm other companies through events and the circumstances of intentionally belittling other brands to promote their own products are generally incomprehensible. I believe that Blue Korea is a fraudulent company, which is why I am not making this video. Small mistakes can accumulate and lead to a precarious process that crosses a point of no return. As a consumer, I have pointed out problematic aspects all along. Perhaps this moment could be the last opportunity, and I hope that the brand I have watched with affection, 'Cheongnyang,' will be remembered with the word 'integrity.' That is my only wish. I have shared all the methods with you, and the choice is yours.

푸른코리아 대표, MR엠알 님께 드리는 말씀

푸른코리아 대표, MR엠알 님께 드리는 말씀