CAD 기능: 레이어 및 경계 개요

Ansun이 레이어 제어 및 경계 조작과 같은 CAD 기능을 간결한 튜토리얼 동영상으로 설명합니다.

### CAD 기능: 레이어와 경계 설명
* 🎨  이 동영상에서는 CAD의 레이어와 관련된 기능을 설명하여 사용자가 다양한 레이어의 가시성과 속성을 제어할 수 있도록 합니다.
* 🔒  레이어를 켜고 끄고, 레이어를 고정하고, 단축키를 사용하여 효율적으로 작업할 수 있는 명령어를 소개합니다.
* ➿  이 동영상에서는 선과 윤곽선에서 폴리라인을 만드는 기능과 실제 작업에서 패치에서 선을 만드는 HB 기능도 다룹니다.
* 📏  또한 두꺼운 폴리라인에 윤곽선을 생성하는 지능을 설명하여 일정한 두께의 선을 만들 수 있습니다.

Hello, this is Ansun, who shares sweet tips and know-how about music. This time, I would like to introduce functions related to layers and boundaries in CAD. I uploaded a video explaining why I can use SketchUp quickly, and there were many mentions about boundaries. So, I prepared a video to briefly explain how to work with boundaries and how to handle them. Now, let's start the video. First, shall I introduce functions related to layers? First of all, you need to know the command 1 followed by a. It is also called ele. When you type la, a window for layers will appear. You can see the layers you are using, their colors, whether they are locked, line types, transparency, and everything you need to control.

You can think of it as a function that you can use here. If you look here, there is a part called Turn On. I will refer to this as the Turn On icon. The frozen part will be referred to as the Freeze icon. When you turn off the bulb icon here, all related layers will be turned off. The same goes for the Freeze icon, turning off and on related layers. This function allows you to hunt the entire area. When you look at it, you can see that I sometimes use La, but for the most part, I have designated shortcuts to use. Let me explain right here. First, there is a function called Layer Is. It is a function that turns off the layers selected by me. Let me show you directly. After selecting the layer, Wall Sunny, if you press Enter, you will see that all layers of Wall Sunny are turned off.

There is a function called 'lad,' if you try it, you will understand. Here, only the control of the major shape is elegant and living, and the rest is all about following that function. Next, I will tell you about the functions of 'array off.' After turning off the array, draw a 100-line after 5% of the array, and you can confirm that the rest becomes an array off. Similarly, you can think of this as a function that turns off the layer of a bulb shape. Next is the function called 'rayon.' If you turned off the array by 5% and want to revive it, when you say you want to turn on 'rayon,' you can see that only parts of the bulb shape unfold. However, if it is frozen in a frozen shape, when you hit 'rayon,' it will not turn on. In this way, in the case of 'rayon,' it is a function that turns on when the bulb shape is turned off.

Please think about it. Next is the Ray FR Jet function, which is also a function that turns off the selected frozen shape. When you do Ray FR Jet, it will show you the frozen shape of the wall. And earlier, when I mentioned Rayon, it means expanding the bulb shape overall. In the case of Raytee HW, it is a function that enlarges the frozen shape when it is turned off. When you turn on AT HW, it turns on the parts that were turned off in the frozen shape. If you turn off the wall, and use Raytee HW, it won't work. Please think about it this way. So far, I have explained the basic commands in CAD, and next, I will explain the preset functions I have created.

If you look at it, it's currently 5:00. For the parts related to this lamp, consider them all as numbers. First, let me explain about the lamp. Think of it as a function that turns on both the bulb shape and the motion sensor. If you turn off both the bulb shape and the motion sensor, as I explained earlier, there is a function that only turns on the bulb shape. Then there is a separate function for turning on the motion sensor. Sometimes it can be inconvenient to operate both separately. In that case, when you give the command 'C', both the bulb shape and the motion sensor, which were both off, can be turned on. Also, for the command 'A', except for 04, consider it as a function that turns off all motion sensors. When you activate the lamp, only the bulb layer and layer 0 will be on, and the rest of the motion sensor parts will be turned off. So, in my case, I would use command 'A' for cases like this.

I am using functions that turn on and off where I can do things. In the case of off, you can think of it as the same function as Layer FR. To make it more convenient, I have created a command called off. By typing off, pressing the wall button, and hitting enter, you can freeze the shape of the wall when you type La. This is a part where you can freeze the shape of the wall. Shall I tell you about the function of NXT next? In the case of XT, it is a function that turns off the freezing adventure other than the selected layer. Earlier, the layer IS coming out of the selected layer, but this is a bit different. It gives the freeze of selected layer 2. When you use XT, you can see that the wall shelf comes alive now. If you turn on the layer, you can see that the freeze shape for 100 lines is on, and you can see that the others are off.

And there is something you need to pay attention to here. There will be functions to turn all shapes on and off, and there will be functions to turn freeze adventures on and off. That's why the biggest reason for doing this is that now on the left, it shows the state of breaking everything in Ex 3D, and on this side, when you click this, it's in a state where the blocks are bundled together. If you try clicking on these blocks, they each have their own layers. Like this Wall Sunny layer that I have matched with this block now, so if we look at it, this Wall Sunny layer is what they have. So, if you turn on and off the Wall Sunny layer, this is how the wall sunny comes to life. By turning on and off the freeze command for the selected block, it recognizes the entire block as Wall Sunny, so this is the block.

You can confirm that everything is turned off, so when using this, you should freeze and use the light bulb shape for about 9 minutes. Another thing to be careful about here is that if you used a printer called D point and it doesn't print, saying that you used a layer that is not printable, then the output does not appear. So, when using it, if this block is not printed, you should doubt whether it is D4 or 7 when you click on it. Next, I would like to explain the functions related to the boundary. There are functions called Polyline and Boundary in this area, which have the function of turning things into a polyline within the area. For example, if you have done some work with lines and you want to change it to a connected polyline, you can select the entire thing and join it.

By using the B5 I just told you about, make a selection, then click inside the area, and press Enter. A separate polyline will be created like this. Think of this function as a boundary or big pull. Now, this is not the end of the explanation. There are functions that you can apply this to. For example, if I made a line for this wall, and then I made a mistake and want to change it to a polyline, there are two ways to do this: you can use XT or AI. After selecting the wall here, you can create a polyline as before. If you look here, you can see that the selection has been worked on as a polyline. Besides this, among the editing functions, you can redraw the rectangle entirely.

Press b5 and then please click on the selection you want to make. [Music] Now, in what way is it done? If you trace all the outlines inside this square, you can think of it as becoming a polyline. By selecting points like this, you need to work by selecting points continuously. After drawing a square like this, if you boundary the things inside, you can work on changing the overall thing into a polyline at once. [Music] With this function, you can convert it to a polyline, and next, I will explain the hb function. What is hb? I've made it like this with a hatch. [Music] When you do fantastic work or practical work, sometimes there are cases like that. There are many cases where there are no lines, and when you move, there are no lines. There are times when you want to make this into a line, and you can solve this with hb.

When you select Solid and press Enter, it moves the Patch, and Patch follows the outline of the patch. Think of it as a function called HP. If you find this useful, I would like to tell you about intelligence for 2K next. It creates an outline on a thick polyline. For example, if you draw a centerline straight, and you want to create two lines with the same thickness, you use K. After using K, if you don't use it anymore and confirm, you can see that lines are created according to the thickness outline. It is possible not only with thin thickness but also with thick thickness. After doing it with a 500-sized pen, if you do KM, and then after not using it, you will erase the thick line first. I'm asking if you can do that, if you do, two books will be made, and only the parts on the outline of the thickness here will be confirmed to work by following the lines.

I have explained the work on layers and boundaries to some extent like this. If you enjoyed this video, please subscribe, like, and turn on notifications. Thank you. [Music]

오토캐드 리습(Autocad Lisp)_layer, boundary

안녕하세요 꿀팁과 노하우를 알려드리는 Ansen Tube 채널입니다

Ansen Tube

CAD 기능 살펴보기: 레이어와 경계

CAD의 레이어를 사용하면 개체의 가시성과 속성을 제어할 수 있습니다.

"켜기" 및 "고정" 아이콘은 각각 특정 레이어를 표시하거나 숨기는 데 사용됩니다.

"la" 및 "lad"와 같은 단축키를 사용하여 레이어를 빠르게 제어할 수 있습니다.

"배열 끄기" 기능은 특정 레이어 패턴을 끄고, "레이온" 기능은 다시 켜고 고정 상태를 재정의할 수 있는 기능을 보여줍니다.

CAD에서 고정된 도형을 조작하는 함수

레이 FR 제트 기능은 벽의 정지된 모양을 드러내고, 레이온은 전체 전구 모양을 확장합니다.

레이티 HW는 꺼진 전구 모양을 확대하고, AT HW는 이전에 꺼져 있던 부분을 켭니다.

'C'와 'A' 명령은 전구 모양과 모션 센서를 함께 켜거나 04를 제외한 모든 모션 센서를 끄는 데 사용됩니다.

XT 기능은 선택한 레이어 이외의 레이어에 대한 동결 모험을 해제하여 특정 부분을 동결 해제할 수 있습니다.

3D 프린팅에서 형상 제어의 기능

새로운 기능을 사용하면 Ex 3D에서 모든 것을 분리하고 블록을 함께 묶는 상태를 토글할 수 있습니다.

선택한 블록의 고정 명령을 토글하면 전체 블록에 영향을 미치며, 월 써니 레이어를 켜고 꺼서 생동감을 불어넣을 수 있습니다.

전구 모양은 약 9분 정도 사용하는 것이 좋으며, D 포인트 프린터를 사용할 때는 올바른 레이어를 선택하도록 주의가 필요합니다.

폴리라인과 바운더리 기능을 사용하면 영역 내에서 개체를 폴리라인으로 변환하여 선을 연결하고 결합할 수 있습니다.

폴리라인 생성 및 함수 편집에 B5 사용

B5 기능을 사용하면 경계 역할을 하는 별도의 폴리라인을 만들 수 있습니다.

이 기능을 벽과 직사각형에 적용하여 선택 영역을 폴리라인으로 변경할 수 있습니다.

이 기능은 윤곽선을 폴리라인으로 변환하는 데도 도움이 되며 선이 없는 경우 hb 함수를 사용하여 사용할 수 있습니다.

솔리드 함수를 사용하여 윤곽선 만들기

문자 HP로 표시되는 '솔리드' 기능은 패치를 이동하고 두꺼운 폴리라인에 윤곽선을 만드는 데 사용됩니다.

이 방법은 500 사이즈 펜과 같이 다양한 두께로 사용할 수 있으며 두께 윤곽선에 따라 선을 만들 수 있습니다.

이 기법은 레이어와 경계에 대한 작업을 정의하는 데 유용하며 디자인 및 초안 작성에 유용한 도구입니다.