Hello, this is krr3d. Today, we're going to create a new, cute NewJeans x Takashi Murakami character.

The previous Powerpuff Girls collaboration was so cute, right? This time, they came out with adorable characters

that perfectly capture each member's characteristics, so I had to make them. Let's start with the 3D modeling!

We begin by posing them from a T-pose base. Did you all see the Phamhocho this time?

Pham teacher, who dominated my algorithm... If you haven't seen it, hold your heart and watch it!

Let's create Hyein's plump lips. And make cat ears, glittering eyes.

Extrude them by color, so it's easier to paint later. Once the modeling is complete,

create an output file, and send it to the 3D printer. ~Printing complete~ Right after printing, there's sticky resin on the surface.

Wash it with a dedicated cleaner. After washing, remove the supports used for printing. Dry it thoroughly

and cure it with UV light. This removes the stickiness and increases the surface strength. I wanted to attach and detach the figures,

so I added magnets. Next, fill the gaps with putty. Fill the holes made to prevent resin buildup inside during printing.

There are support marks left. Smooth the surface with sandpaper. Spraying primer in between helps to check for scratches

and fills in minor gaps. Once the post-processing is done, spray primer. Primer helps paint adhere well

and smooths the surface. Before painting the skin, mask the eyes. Put lacquer paint into the airbrush

and paint the base color. After airbrushing, remove the masking tape. Pretty pastel colors.

Finished the headband! 🐰 Let's paint the small parts with enamel paint. This Takashi character has detailed eyes,

so they look shiny and cute. (I love the sparkling eyes so much!) Use enamel thinner to fix any paint that went outside the lines.

I sprayed gloss spray intermittently during painting. This coats the base color, making it easier to correct mistakes.

Draw cat-like eyeliner. This time, Haerin's character looks just like when she was a baby president.

This comparison shot keeps popping up in my algorithm, lol. Let's paint Minji's thick eyebrows.

Paint the lips a soft pink. When I saw Hyein's plump lips, I thought I had to make them into a figure.

I wanted to try applying clear paint to these lips 🤍 I made a figure display stand with Takashi flowers. Since there were some prickly hairs,

I applied UV resin and sprinkled nail velvet powder to give it a different texture. Finish with a matte coat.

(The eyes are still masked) Hyein's lips with clear paint for a candy-coated look 🍭

Finish the rest with a matte coat. After drying the parts well for about a day, apply adhesive and assemble.

Assemble the display stand, and the NewJeans x Takashi character is complete. Kang Haerin looks strange

CAT! Today, I'll teach you how to make soap bubbles. Thank you for watching today's video.

3D프린터로 뉴진스 피규어 만들기

크르르3D 

뉴진스 X 무라카미 캐릭터 3D 모델링 및 출력

뉴진스와 무라카미 캐릭터 콜라보 피규어 제작 시작

각 멤버 특징을 잘 살린 귀여운 캐릭터 디자인 언급

3D 모델링 시작, T 포즈 기본 자세 설정

혜인 캐릭터의 입술, 귀, 눈 등 세부 모델링 작업

모델링 완료 후 출력 파일 생성 및 3D 프린터 출력

출력 후 수지 세척 및 지지대 제거

건조 후 UV 경화 작업으로 접착성 제거 및 표면 강도 증가

자석 부착 및 퍼티로 틈 메우기

사포질로 표면 다듬기 및 프라이머 도포

프라이머 도포 후 스크래치 확인 및 틈 메우기

눈 마스킹 후 에어브러쉬로 베이스 색상 도색

마스킹 제거 및 파스텔톤 색상 도색

에나멜 도료로 세부 도색 및 수정 작업

광택 스프레이 사용 및 멤버별 특징 도색

피규어 받침대 제작 및 마감 작업

부품 건조 후 접착제 사용하여 조립

피규어 디스플레이 및 완성작품 공개