Hello, this is krr3d. Today, we will be making a Psyduck figure.

Not just any Psyduck, but one that's being hit by Farfetch'd's leek all day long.

Psyduck is known for competing with Slowpoke for the title of the dumbest Pokémon. Which Pokémon do you think is the dumbest?

In the actual anime, Farfetch'd keeps hitting Psyduck on the head with its leek.

When Psyduck's headache gets worse, it uses its psychic powers to send Farfetch'd flying.

I like Psyduck when it's in its clueless state, not knowing why it's being hit,

so I've decided to make a figure of it constantly getting hit. Once the modeling is done, I create the print file,

and set it up for printing with a 3D printer. When the print is done, I remove the output from the build plate.

Immediately after printing, there's sticky resin on the surface. I wash it clean with a special cleaning solution.

After cleaning, I remove the supports that were set up for printing. I dry it well and cure it with UV light.

This removes the stickiness and increases the surface strength. I attached a magnet to Psyduck's foot so it can be detached.

I'll attach the base that I divided to fit the print size in advance. I drilled holes in the print to prevent resin from pooling inside during printing.

Now that I don't need them, I'll fill them with putty. Next, I'll smooth out the rough support marks with sandpaper.

I'll use increasingly finer sandpaper to make it smooth. Once the post-processing is done, I'll spray it with a primer for painting.

The primer helps the paint adhere well and prepares the surface. I'll mask the areas that need protection before painting.

Now, I'll put lacquer paint in the airbrush and paint the base color. Once the lacquer paint dries, I'll use enamel paint to dot Psyduck's eyes.

I'll also paint the pattern on Farfetch'd's forehead with dark brown. Carving a groove like this makes it easier to paint.

Farfetch'd wasn't designed for battles, so its base stats are the lowest, but it's still a very rare Pokémon.

It's known for being very attached to its leek, and as the number of leeks decreased, so did the population of Farfetch'd.

Some people have started planting leeks to increase the number of Farfetch'd. Farfetch'd is based on a Japanese proverb,

because Japan is famous for duck dishes with leeks. The proverb implies that if both appear at the same time, it's perfect for making a meal immediately.

Due to this meaning, there was a rumor that Farfetch'd were eaten with their leeks, reducing their numbers.

This even led to an urban legend about them. 😱 When the painting is done, I spray a finishing coat.

Once the paint is completely dry, I assemble the parts I separated earlier. I drilled holes in Farfetch'd's left leg and the base.

I inserted an axle through these holes, allowing the wings to move with an automata mechanism.

To make it repairable if the interior breaks, I attached a magnet to one wing so it can be opened.

When I place Psyduck on the base, the Farfetch'd vs. Psyduck figure is complete.

Thank you for watching the video today. See you in the next video, bye~

3D프린터로 파오리vs고라파덕 피규어 만들기

크르르3D 

피규어 제작 과정 소개 및 컨셉 설명

3D 프린터를 이용한 고라파덕 피규어 제작

파오리의 파에 맞는 고라파덕 컨셉

고라파덕과 망나뇽 중 어떤 포켓몬이 더 멍청한지 질문

애니메이션에서 파오리가 고라파덕을 파로 치는 장면 언급

멍한 상태의 고라파덕을 표현하고자 하는 이유 설명

모델링 후 3D 프린팅 파일 생성 및 출력

지지대 제거 및 건조, UV 경화 과정

자석 부착 및 기본 베이스 연결

구멍 메우기, 사포질 등 후처리 과정

도색 작업 (베이스 색상, 눈, 파오리 무늬)

파오리에 대한 정보 및 유래 설명

자동 장치를 위한 축 연결 및 자석 부착

파오리 vs 고라파덕 피규어 완성

영상 시청에 대한 감사 인사 및 다음 영상 예고