6 of the wet coating agents are famous. I compared it for two months and tested it. Hello, we're Linus People who like car washing, beginners. If you apply wax coating, it's good to see when it rains. It'll be easier to remove contaminants in the next car wash. It takes a lot of time and effort to raise water wax or solid wax every time. It's a hot summer. It's a cold winter. It's easy to coat. It's a wet coating agent. I compared and used 6 products for 2 months and tested them. I'm going to use the finishing compound to clean up the painted surface.
I wiped off all the oil with IPA. For comparison of wet coating agents, especially after diluting them.
It's a method of coating with high-pressure water. It wasn't easy to divide it with a covering tape. The ratio may not match the recommended dilution ratio. The coating agent may have invaded the high-pressure water. Please take that into consideration and look at it, and I hope it will help you choose a wet coating agent.

There is a detailed dilution ratio depending on the situation, but briefly, I used foam lance with water as the minimum dilution ratio. I calculated the maximum dilution ratio by using a sprayer. Waterflow 3 of TAC system Blue, 1 yellow, 2 pink, and 3 versions. It's so popular that I bought the first product. In the beginning, the price was high, but now it's gone down a lot. Compressed sprayer 1:200 pomlance 1:100. The dilution ratio is the highest among wet coating agents.
When you use one liter each as a sprayer. When you use 500ml pom lance. You can use it 60 times each worth 583 won. I'm Madge Seal of Auto Bright Direct. It's the product with the lowest dilution ratio.
Compressed sprayer 1:10 pomlance is 1:4. The 1 liter spray method can be used 5 times, worth 7,700 won. For 500ml pom lance, it's 9,625 won.
If you use it 4 times, you'll use up 500ml.

It's a cream coat from Glossbro. It's the cheapest wet coating agent. On the detailed page, it is recommended that it is a product exclusively for form lance. The Q&A bulletin board does not mention the use of a compressed sprayer. The spray method is 1:20, and the foam is 1:15. A 1-liter spray method costs 825 won per use. You can use it 20 times. KRW 1,100 when using 500ml pom lance. You can use it 15 times. It's Fireball's Easy Coat Extra. The spray method is 1:25. Pomranspiration is 1:15. It's 2,400 won for a 1-liter sprayer. You can use it about 13 times. It's 2,000 won worth of 500ml pom lance. You can use it 15 times. The rest of the Luminous and The Class products are financial problems. It's not a diluting stock product, but it's sprayed right away. I bought it as a direct product.

For the purchase of various car wash items required for the comparative test video. Like and subscribe don't cost money. Please press it once. I'd appreciate it if you watch the commercial videos that come up from time to time. If you compare Luminous Aqua based on undiluted products. The dilution ratio is 1:50 for a 1:200 foam lens based on a sprayer. It's 399 won for a 1-liter sprayer. You can use it 100 times. In terms of dilution ratio, the cost of using one time is the cheapest. If you use 500ml foam, it's 798 won. You can use it 50 times. The Class Water Aging is a product from Extreme S. It was being sold. It's an undiluted product, and the direct product is. I bought an old water aging one. If you compare it based on the Extreme S product. The spray method is 1:100 pomranspiration is 1:20. It has a dilution ratio.

It's 798 won if you use a 1-liter sprayer.
You can use it 50 times. KRW 1,995 when using 500ml pom lance.
You can use it 20 times. Take off the covering tape, spray the bonnet with high-pressure water. When I poured water, I felt the difference between the products. There was a difference between the undiluted product and the direct product. I only spray it with a wet coating agent without a base coating agent on the bare skin. I might not be able to perform properly.
I'm going to do additional coating until the 2nd and 3rd rounds. It doesn't look good on the camera. I don't know the difference in color. Waterflow on the driver's side. I only applied AD Madge Seals on the passenger side. Waterflow looked more luminous. When I compared the shapes of water droplets on the wet bonnet, AD Madge Seal and Luminous Aqua were the best. I liked Fireball Easy Coat Gloss Bro Cream Coat.

If you check the painting surface after 20 days, The water flow and aqua seats have become finely clean. After 28 days, if you look at the painting surface of the car wash. From the left, the easy coat looks the cleanest. Next, Luminous Aqua TAC Water Flow looked good. The AD Madge Seal looked the best when you look at the shitting before the car wash. I liked aqua and cream coat. Easycoats and waterflows looked similar to each other. If you meat from the right, you can see the link phenomenon of aqua products. The link phenomenon has also been confirmed for the three products on the left. It's not that big of a difference.
There was a slight difference in water clumps. Dilute the alkali-free wash 1:10 and sprinkle it.
I also saw visual differences. After prewashing, I sprayed high-pressure water.
Aqua Easy Coat Waterflow showed good water repellency. I did the 3rd layer after 29 days. This time, I'm going to dilute all the direct products.

I bought it and coated it with the support of the subscribers. And spread your chemistry with water and use high-pressure water.
I did the coating with the last rinse. If you spray it like rain with a shower nozzle, if you look at it from a distance. The beading members showed good performances. If you look closely, there was a difference in the shape of water droplets. When I sprayed high-pressure water, from the left, the 2nd, 4th, and 6th products looked good. Even if you look at the slow scene, it was not easy to find the difference between the three products. While doing the 1st, 2nd, and 3rd layering. Luminous Aqua products have shown good performance in general. I think it's my favorite wet coating agent. Easy Coat and Waterflow products looked weak in the beginning. The more you lay it on, the better the performance. Madge seal and cream coat showed good performance in the first coating. After you coat it with water wax or solid wax.

If you want to coat it quickly when it's hot or cold, and finish washing your car, it's good to use a wet coating agent like this. I was wondering how much it would perform, so I tested it. After layering the mando scene up to three times, I found a better-than-expected product: Luminous Aqua. I got a small amount of support from the subscriber Gong Liang. Once again, I'd like to thank you. Coating easily, washing your car quickly, and getting out of the car wash machine, I see a coated vehicle that drips down even after spraying and washing it with water. I hope beginners can enjoy washing their cars. That's all for today's video. I'll come back with a better video next time. Thank you!

간편하게 뿌리고 씻어내면 코팅되는 습식코팅제 6종 비교

비트 감성 리뷰 세차 디테일링채널
Item review with music beat Car washing Sensitivity Detailing Channel
音楽ビットと共にする用品レビュー 洗車感性 ディテールリングチャンネル
與音樂節奏一起進行的用品評論洗車感性細節頻道
