Hello, this is Jeesun from Ahnsim Factory. In today’s video, I’ll show you the process of creating a new character, “The Child with the Rabbit Mask.

” The rabbit mask symbolizes a defense mechanism I used to hide feelings of insufficient love, loneliness, and emptiness from my childhood.

While the mask protected me, it also ironically forced me to hide my true self. The rabbit and bear characters that often appear in my work act as a bridge between my childhood self and who I am now.

The rabbit, with its soft and warm design, represents an absolute companion who comforts the lonely child and embodies the ideal adult I once wished for.

Through this project, I wanted to tell my younger self that everything is okay now.

Here’s the completed model with its meaningful details. I converted the file and printed it using a 3D printer. After printing, I had to seal the small holes created to drain the resin inside the model.

For this project, since I plan to make replicas, I carried out the sanding process with extra care.

When it comes to 3D printing, some layering is inevitable, but the only way to achieve a clean finish is through sanding.

Although the process was edited in the video, I repeated the steps of sanding, applying surfacer, checking the surface, and sanding again several times.

Once the surface was clean and smooth, I did a dry assembly to ensure everything fit together properly before moving on to reproduction.

The rabbit mask is designed to attach and detach with magnets, so I checked that as well. Since it’s a thin part, using a large magnet was difficult, so I made it so it can attach with just a slight hold (though it’s a bit weak).

The duplicated parts are now here! Sometimes I handle the duplication process myself, and other times, I ask a professional for help.

It’s been a while since I worked on reproducing pieces because I plan to sell these and create various versions of them.

Duplicated parts come with resin injection points and cut marks from the silicone mold, so I need to sand those areas as well.

The sprue gate can be sanded down with very coarse sandpaper, but I prefer to remove the bulk of it like this first and then proceed with sanding.

I cut them first with nail clippers, which might be a unique method of mine! I didn’t learn this from anyone— I figured it out step by step while working, so it might just be my own way of doing things.

It’s inexpensive, and the cuts are surprisingly clean.

Highly recommended! After trimming, I sanded the parts again. The duplicated parts also have cut lines that need careful sanding.

Since there are multiple parts, the process takes much longer—welcome to the endless cycle of sanding. Once sanding is complete, I cleaned everything thoroughly.

To be honest, I should have finished the magnet work before cleaning, but I was so happy to be done with sanding that I forgot.

The magnets are very small, so it took me several attempts to place them correctly. However, in the video, I edited it to look like I nailed it on the first try—like a pro.

After inserting the magnets, I sealed them so they wouldn’t be visible and sanded the surface one last time (really, the final sanding).

Finally, it’s time to prepare for painting. For assembly points, I use clamps, but if there’s nowhere to clamp, I secure the parts with a glue gun.

A lot of people asked how I hold the parts in my previous videos. It’s simple, but I guess it’s more of a technique or know-how.

Speaking of techniques, I also recommend using a cat scratching post— A big reveal of small and cute tips! 😉 Now it’s time to paint!

After the base coat, I started applying the main colors. I added a highlight to the bottom— nice and soft. ☺️ The rabbit character was airbrushed with a gradient, and of course, I added highlights to the bottom as well.

I masked the parts in stages to achieve a clean finish.

I also hand-painted the small details, carefully applying the paint while holding my breath for precision. For coating, I made sure to wear a proper respirator mask.

Most people use masks with filters on both sides, but I use a lighter one because the heavier ones strain my neck. (Shoutout to my neck disc issues.) I typically apply three layers of coating, allowing time for drying in between.

Now we’re almost done! This part of the process is my absolute favorite.

For the body, I debated between matte and glossy finishes but ultimately went with glossy for that shiny effect. ✨ Finally, it’s time to assemble!

I press firmly and attach it carefully. I added the ribbon and, lastly, put the rabbit mask on top.

Ta-da! 🐰 It's finished :) I plan to work on various versions in the future, so please stay tuned and enjoy the results.

See you in the next video! 🫶 (P.S. There’s a bonus clip at the end!)

아이패드로 모델링부터 3D 프린터 출력까지, 아트토이 제작 과정 [nomad sculpt]

Scripts