NHN Battery: Care and Maintenance Tips

Improper charging damages NHN battery cells, requires wider structure, careful handling, and reset after replacement for proper function.

### NHN Battery: Characteristics, Usage, and Maintenance Tips
* ⚡ NHN batteries have an external structure that is **more than 10 times wider than the general 4P structure** to prevent **severe internal cell damage** when fully charged.
* 🔋 Unlike AGM batteries, NHN batteries do not last long if left unattended and require **careful handling**.
* 🔄 After replacing the NHN battery, it is necessary to **reset it to ensure proper functionality**.
* 📊 The battery level may show as fully charged, but it is actually at **40%**, and it's acceptable not to charge it due to the **plan**.
* 🚗 NHN batteries are widely used in specialized centers for luxury car brands like BMW, Mercedes, and Audi, as well as in **rental and commercial vehicles**.
* 🔍 A battery sensor needs to be installed with the NHN battery to allow the vehicle to **monitor the battery usage and charge status**.
* 🔧 When installing the battery sensor, it is recommended to connect the ground to a specific point rather than directly connecting it to ensure **proper battery usage**.

I will briefly explain about the NHN battery this time. Now, for those who use the battery, there are people who do not express a word properly, right? So, what is the problem? When you fully charge the battery, the internal cells can be damaged severely. Therefore, compared to the general 4P structure, the external structure is much wider, more than 10 times wider. Now, there was a comment from someone saying that they changed the battery because their star banger function was not working properly. However, the AGM battery is completely different. It becomes a quantum death, and it will not last long if you leave it unattended. You need to handle it carefully. After replacing the battery, you need to reset it. You have to reset the battery. The battery level is now fully charged.

I need to make it clear that it is not charging at all. Actually, it's at 40%, but because of this plan, it's okay not to charge. When the signal comes, it means it won't progress anymore because when charging the power, the alternator is under load. So, when that load is applied, it means you need to accumulate more concepts to prevent the fund from being blocked. There is a separate device that says not to charge to prevent overheating. This is a very expensive battery, and if you go to a specialized center like BMW, Mercedes, Audi, etc., they all have it. Nowadays, they use it for progress, so most rental businesses or businesses will have it. They directly test the battery in the car. After testing how much volume is in the budget, you have to lease it again when the impact and time come. Only then can you proceed up to 5%, and this may seem strange.

Are there people who have installed battlefield components here now? Here, this is the battery sensor. After installing the battery sensor, you need to install it. I recommend connecting the ground to this point for those who have installed it before. You should not connect the ground directly here. The electricity should only be supplied through the ground. This way, the vehicle can check how much battery has been used and how much has not been charged. Since it is now fully charged, you can start driving like this. If you use it like this, you won't be able to use the battery properly. It's about 5cm to t2r. [MUSIC]

'스탑 앤 고' 차량의 배터리, 이렇게 관리하세요! (AGM 배터리 관리법)

모텍 Motech

The NHN battery has a wider external structure compared to the general 4P structure, which can be damaged if fully charged, requiring careful handling.

Unlike the AGM battery, it needs to be reset after replacement and should not be left unattended to prevent a quick deterioration.

It is an expensive battery commonly found in specialized centers and used by rental businesses, requiring testing in the car and careful management of charging to prevent overheating.

Installing the Battery Sensor for Battlefield Vehicles

The battery sensor should be installed with the ground connected to a specific point to allow the vehicle to monitor battery usage.

Connecting the ground directly is not recommended.

This installation allows the vehicle to track the battery's usage and charge, ensuring it is used properly.