Enhancing Sony Camera Grip with Affordable Extension Solution

Sony camera users can enhance grip comfort with an affordable extension bracket, improving usability over Canon models.

### Improve the Grip on Your Sony a7R5 with a Simple and Affordable Solution
* 📷 Many photographers worry about the **smaller grip on Sony cameras** when switching from Canon due to the **difference in size**.
* 🤚 The SmallRig grip extension bracket is a **cheap and simple solution** to enhance the grip on Sony cameras, making it **more comfortable for users with larger hands**.
* 🔧 The bracket not only extends the grip, but also adds an **ARCA Swiss mount**, **extra mounting points**, and a **built-in tool**.
* 👍 By providing a place for the pinky finger to rest, the extension allows for a **more secure and comfortable grip** on the camera.
* 🔄 With the extension, users can reach the **shutter button more easily** without having to adjust their hand position.
* 🎥 The reviewer recommends this grip extension as an **elegant and affordable fix** for those hesitant to switch from Canon to Sony mirrorless cameras.
* 💼 The video concludes with a call to action for viewers to **subscribe and like the content**, while also expressing concerns about **Canon's direction in the market**.

you know what they say about big hands, big gloves. What is up, guys? Nick here, and I am back with another video about the Sony a7R5. Uh, on a side note, if you uh live in a place that has winter driving school, not even joking, uh, get these gloves. These are great for photography. They will uh keep the wind off your hands, and they're super thin, so you can still control all the buttons on the cameras. Anyway, not here to talk about that. Um, one of the things that I was worried about when switching from Canon to Sony was the size of the grip. Now, um, I'll post a picture here. Most people don't realize how actually much bigger the Canon bodies are than the Sony bodies. And not when you have, I don't have big hands, I just have normal-sized hands. Um, they're a little wider than normal, but they're not super long. But uh, what ends up happening is your finger comes off the edge of a Sony camera, and um, a lot of people don't like that. They say

the Sony bodies are too small, and that's why they prefer Canon, and I get that. But there's one thing that you can get that's super cheap, super simple solution, that makes your Sony camera's grip just as well as your Canon cameras. So, uh, excuse the Vintage Pentax lens I have here. I've not fully beaten the Hipster out of myself. Anyway, um, so the thing is, the small rig makes this bracket, and all it is, is it's just a grip extension. And then it also gives you an ARCA Swiss here on the bottom, which I thought was really cool. And it gives you a couple extra mounting points and a built-in tool. But this is very inexpensive, um, and what this does is it just extends the grip a little ways. Because if you see here, you know, like if you have, I'm not sure how they were intending this grip, because if you have your three fingers on the grip that Sony intended, you cannot touch the shutter button. Like, my fingers, like, that's as far as my finger goes. So

It's almost like quirked up to even touch the shutter button here. So, what you end up doing is you end up sliding your pinky down underneath the camera so that you can, you know, like kind of scooch out and press the shutter button, which I've never thought was terribly comfortable. But what this grip does is it just gives your pinky a place to go so that you can actually just grip the camera like this. And you can see, like, how far into the grip my pinky sets. And then, you know, you have much more flexibility because your finger is straight on to manipulate the shutter and the different buttons. And then, you know, like, you don't have to change much to get to the back dials of the camera. You can still get to them with your thumb. So, this bracket, I think, is a perfectly elegant, inexpensive solution to fix this problem for Sony. So, um, I hope that that helps a few people who are kind of hesitant from switching from a Canon over to the Sony mirrorless.

system, which if you watch some of my further videos or my previous videos, I really think that you should do at this point because of how I think rapidly downhill Cannon is going to go with their announcement of not supporting third-party lenses and just being more and more anti-consumer. So, um, I know that was a short video. I've got more coming out soon. Thanks for watching, um, trying to get my subscriber count up, so go ahead and subscribe if you find my content helpful. Give us a like for the algorithm, and I will catch you guys later.

I missed the ergonomics of Canon until I found this Sony A7R V accessory

Nick Del Duca

Nick discusses his transition from Canon to Sony cameras, highlighting the smaller grip size of Sony bodies as a common concern.

He suggests a simple and inexpensive solution: a grip extension bracket from Small Rig, which also offers additional features like an ARCA Swiss mount and extra mounting points.

The grip extension helps to better position the fingers for easier access to the shutter button, addressing the issue many users have with Sony's grip design.

The speaker discusses the uncomfortable process of pressing the shutter button on a Sony camera.

They highlight the importance of a grip that provides a place for the pinky, allowing for a more comfortable and flexible hold.

The bracket solution is presented as an elegant and inexpensive way to improve the grip and ease the transition from Canon to Sony mirrorless cameras.

Canon's Shift Away from Third-Party Lenses

Canon's recent announcement of not supporting third-party lenses is causing concern for consumers.

The company's actions are seen as increasingly anti-consumer and may lead to a decline in its reputation.

The creator is planning to release more videos on this topic and encourages viewers to subscribe and like the content.