Yes, hello, this is Kingka Story. Today we will learn how to replace a Santa Fe TM vehicle's wipers.

I'm making this video to show you. The vehicle is a 2019 model.  As you can see, there's tape attached like this.

The glass broke while the customer was using the wiper. I don't think this is a major problem.

If you don't know how, replacing a wiper can cost 10,000 to 20,000 won.

There are cases where it costs over 300,000 won. To prevent our customers from making mistakes,

I'm filming this video to provide some information. We're going to replace the wipers.

Now, in older cars, if you lift the wiper arm like this, you can hear a click.

But in imported cars or Hyundai cars, it doesn't sound like that.  If you look, just lift it straight up from the hood.

So how should these cars be replaced?  It's called a multi-function switch here.

There's a switch we use for the wiper. If you move this up, this is what should happen when the washer fluid comes out.

It's not working right now. Even if I upload it, it doesn't work. After turning on the wipers once on the road, turn them off like this.

Within 10 seconds, if you turn on the wiper switch like this, the wiper arm will lift like this,

so you can replace it in this position. Let's try again. The wiper arm lifts like this.

If it lifts like that, it should be in the driver's seat like this. I can hear it from both passenger seats like this.

You can replace it in that position. If you leave it like this, there's a cover on this side that holds the wiper.

A screwdriver, or you can use another extension and listen like this. If you stop by, look below here.

Different wipers. In some cases, you may need to press the center button. If you press the button in the middle,

just hold down the button and move down. There's nothing special about this, so please listen to this.

If you lift the cover and lower it like this, it will come out. You can take it out like this. Turn it in this direction, like this.

You can take it out like this. And when you plug it in, replace it with a steel wiper.

After inserting it like this, attach it like this. And just press this. You can do the same for the passenger seat.

If the wiper replacement is complete now, come this way and you won't have to move it again.

It's not working here again, Kion. And then they willingly gave it to me again and raised it once, but no.

Leave it like this, Kion. And when it goes in from this side, all you have to do is move it up once.

I think you can do it like this. Yes, thank you.

자동차 와이퍼 교체하는 방법(싼타페TM) How to replace car wipers (SantaFe TM)